Inhaltsverzeichnis
Werbung
Installation instructions
GB
Dear customer,
You have purchased a high-quality and
long-lasting product from our line of goods.
Please read these instructions carefully before
assembling and observe the notes.
These instructions contain important infor-
mation on installation, adjustment, care, and
spare parts.
Therefore, keep the instructions in a safe place
and pass them on to possible subsequent
owners.
Safety notes
• Only allow experts carry out the
installation work.
• CAUTION DAMAGE BY WATER!
Prior to installation please turn the general
water supply of.
• Ensure that all gaskets have the correct it.
• We recommend the installation of a ilter
into the appliance or at least the use of
angle valves with ilter, in order to avoid
the inlow of foreign matter, which could
damage the cartridge.
• This tap is only intended for use in private
households! Only suitable for use in rooms
with a temperature over 0° C; when there
is danger of frost, shut of the water supply
and empty the tap.
• If the tap not used for a longer period, we
recommend to initially let a larger quantity
of water low through before withdrawing
drinking water.
• Take care when adjusting the warm water.
Danger of scalding!
Disposal
Your washbasin tap is delivered in a solid
packaging, in order to protect it against
transport damages. The packaging consists
of recyclable materials. Dispose it in an env-
ironmentally suitable manner.
Do not throw the product into the normal
domestic waste at the end of its service life,
but ask your municipal administration about
the possibility of an environmentally friendly
disposal.
Technical data
• Flow pressure: recommended 1.5 bar;
install a pressure reducer at more than 6 bar
• Water temperature: max. 80°C
• Water connection: warm - left/cold - right
Installation Instructions
• Only hand-screw the connecting pipes,
do not use pliers or a wrench!
• After installation unscrew the mixer
nozzle, lush the pipeline and the tap very
well (warm/cold water supply), in order to
lush out contaminations (swarf and hemp
remainders). After lushing, screw the mixing
nozzle onto the spout again.
• Do not twist or tension pipes! At irst use
check connections for leaktightness!
• We do not assume any warranty for in
correct installation - in particular for subse-
quent damages!
T he illustrations are to be considered as
igurative representations, deviations of
the product are possible.
Subject to technical modiications.
6
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
