Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical parameter
Drum dredge machine
Pipe diameter According to the choice of cable, the pipe size is also different, see
the table below).
caliber
Pipe length
Steel cable size
in.
ft. （M）
1 1/5"（30mm）
200（60M）
3— 8
Motor:
Type........................ 110V / 60Hz, 230V / 50Hz, inverted universal phased AC
motor.
Motor speed is........................ 1700r/min/1400r/min
Spring speed is........................ 520r/min/430r/min
Output power of........................ 1100W
Machine inspection
Before using the machine, follow the following steps to check the machine to avoid
unnecessary accidents, such as electric shock, cable distortion, breaking and so
on.
Always wear safety glasses, gloves and other suitable protection devices, such as
chemical protection, protective gloves, etc.
1. Check the gloves for the dredging machine to confirm that there are no damage,
wear and loose parts, otherwise these parts are easily involved in the steel cable
and bring danger. Gloves protect the hand from rotating steel cables. If the gloves
are damaged, worn and loose, replace the new gloves to use the dredge
machine .
- 8 -
Werbung
