VEVOR GQ-200 Bedienungsanleitung Seite 6

4. Any adjustment tools, such as wrenches, should be cleaned up before the
machine starts. These tools are very dangerous when involved in the moving parts
of the machine, which are easy to cause personal injury accidents.
5. Keep your balance and don't lose your balance while operating the machine.
This will give you a better control tool in unexpected situations.
6. Use personal protective equipment correctly and always wear safety glasses.
Personal protective equipment includes dust masks, anti-skid safety protective
shoes, hard cushions or thermal protective devices. Appropriate use of these
protective equipment will reduce the occurrence of personal injury accidents.
Use and maintenance of the tools
1. Do not overuse the tools, and do the corresponding work according to the
purpose of the tools. Reasonable selection of tools to complete the work according
to its designed purpose will produce twice the result with half the effort, and it is
safe.
2. If the switch of the machine does not work properly, then stop using the
machine. Any equipment whose switch does not work is very dangerous and must
be repaired immediately.
3. The power supply must be disconnected before adjusting the tools, replacing
the accessories, and storing them. These measures may prevent the risk of
accidentally starting the tool.
4. Be careful not to store power tools for irrelevant people, especially for children.
Because power tools are very dangerous for trained people.
5. Carefully maintain the tools to ensure that the head and blade is sharp. Proper
maintenance and keeping the blade sharp can reduce the knots and easily control
the cables.
6. Check the tools regularly to see whether the position of the moving parts is not
correct, the parts are damaged or other damage that may affect the normal use of
the tools. If so, be sure to repair them before use. Many accidents are due to the
improper maintenance of the tools.
7. Please use only the recommended attachments. Accessories suitable for one
tool can be dangerous for another tool.
- 5 -