VEVOR D17 Bedienungsanleitung Seite 9

5.1.Install the cleaner hook F on the side of the pole;2 hooks F for lower
pole B, 3 hooks F for middle pole C , and 1 hook F for upper pole
D;Installing the hook F, first align the hole position on the rod, insert the
hole position, and then card down into the card slot.
6.2.Install the Plug holder H on the back of the lower pole B, first align the
hole position on the rod, insert the hole position, and then card down into
the card slot.
7.Use 2 screws L to mount the vacuum cleaner charging holder on the top
panel E and lock the back with a wing nuts M.
Note:Vacuum cleaner charging bracket requires additional purchase, this
product does not include this accessory
- 7 -