VEVOR D17 Bedienungsanleitung Seite 7

Installation Guide
1.Refer to the position of screw holes with chamfer and paste 6 mats N on
the bottom of the base A.
2.1.Use the 3 screws I to install the lower pole B on the base A;Screw I is
installed upward from the chamfer screw hole at the bottom surface of the
base A, and finally tightened in the three screw holes of the lower pole B.
3.Middle pole C installation.
3.1Insert the connector G into the lower pole B, then trap the middle pole C
- 5 -