Seite 1
Technical Support and E-Warranty Certificate www. vevor. com/support TV LIFT USER MANUAL MODEL: DT450 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Seite 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Warning-To reduce the risk of injury, user must read instructions manual carefully. CORRECT DISPOSAL This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.
PARTS LIST A M8*20 B M8 C M7*60 E M5*8mm Φ7*Φ10*60mm Fixed On The Cover 4PCS 4PCS 6PCS 6PCS 6PCS F M5*10mm Blanking H M6*30mm I M6 Φ6*Φ16*1mm 4PCS 4PCS 8PCS 4PCS 4PCS K Cylindrical L M6*10mm M M8*30mm Sleeve 4PCS 4PCS 4PCS...
Seite 5
INSTRUCTIONS STEP 1 Remove the Cover First. STEP 2 Install and Fix The Upper and Lower Racks: Connect the chassis to the pylon. Align the pylon holes with the upper and lower holes of the chassis and secure them using four bolts and nuts.
Seite 6
STEP 3 Place the beam of the support to the installation position, mark the holes and drill holes, put four expansion tubes into the holes, and fix the main body of the support through the wall plate. STEP 4 Secure the Housing Cover: Align the left and right holes of the housing cover with the holes on the housing and secure them using six countersunk screws.
STEP 5 Install the bracket ① Insert the two beams into the two holes on the upper and lower sides of the hook, and secure the plugs at both ends of the beams by using screws. ② Connect the upper and lower four holes of the mounting plate to the middle four holes of the beam through bolts and nuts.
Seite 8
STEP6 Connected TV ① Select the appropriate holes for the two vertical hooks of the assembled bracket, and connect the bracket with the holes on the back of the TV. ② Install the safety screws above and below the two hooks respectively.
PRODUCT PARAMETERS Safe Loading Adapter input Model Input Region Weight voltage America DC29V 100-240V~ DT450 88lbs 1.8A 50/60Hz Europe...
Seite 12
Technical Support and E-Warranty Certificate www. vevor. com/support...
Seite 13
Machine Translated by Google Assistance t echnique e t c ertificat d e g arantie é lectronique w ww. v evor. c om/support ÉLÉVATEUR D E T ÉLÉVISION MANUEL D 'UTILISATION MODÈLE : D T450 Nous c ontinuons à n ous e ngager à v ous f ournir d es o utils à d es p rix c ompétitifs. « Économisez ...
Seite 14
à n ous c ontacter : A ssistance t echnique e t c ertificat d e g arantie électronique w ww.vevor.com/support Il s 'agit d e l a n otice d 'utilisation d 'origine. V euillez l ire a ttentivement t outes l es ...
Machine Translated by Google Avertissement P our r éduire l e r isque d e b lessure, l 'utilisateur d oit l ire Lisez a ttentivement l e m anuel d 'instructions. ÉLIMINATION C ORRECTE Ce p roduit e st s oumis a ux d ispositions d e l a d irective e uropéenne 2012/19/UE. ...
Seite 16
Machine Translated by Google LISTE D ES P IÈCES Un M 8*20 B M 8 C M 7*60 E M 5*8mm Φ7*Φ10*60mm Fixé s ur l e Couverture 4 p ièces 4 p ièces 6 p ièces 6 p ièces 6 ...
Seite 17
Machine Translated by Google INSTRUCTIONS ÉTAPE 1 R etirez d ’abord l e c ouvercle. ÉTAPE 2 Installer e t f ixer l es r acks s upérieur e t i nférieur : c onnectez le c hâssis a u p ylône. A lignez l es t rous d u p ylône a vec l es t rous s upérieur e t i nférieur du ...
Seite 18
Machine Translated by Google ÉTAPE 3 Placez l a p outre d u s upport s ur l a p osition d 'installation, m arquez l es t rous e t p ercez d es t rous, p lacez quatre ...
Seite 19
Machine Translated by Google ÉTAPE 5 Installer l e s upport Insérez l es d eux p outres d ans l es d eux t rous s itués s ur l es c ôtés s upérieur e t i nférieur d u crochet, ...
Seite 20
Machine Translated by Google ÉTAPE 6 Téléviseur c onnecté S électionnez l es t rous a ppropriés p our l es d eux c rochets v erticaux d u s upport assemblé e t c onnectez l e s upport a ux t rous s itués à l 'arrière d u t éléviseur. ...
Seite 21
Machine Translated by Google ÉTAPE 7 Adaptateur d e c onnexion...
Seite 22
Machine Translated by Google MOYENS D E C ONTRÔLE D URAL...
Machine Translated by Google PARAMÈTRES D U P RODUIT Entrée a daptateur Chargement s écurisé Modèle Saisir Région Poids tension Amérique DC29V 100240V~ DT450 88 l ivres 1,8 A 50/60 H z Europe...
Seite 24
Machine Translated by Google Assistance t echnique e t c ertificat d e g arantie électronique w ww. v evor. c om/support...
Seite 25
Machine Translated by Google Technischer Support und E-Garantie-Zertifikat www.vevor.com/support TV-LIFT BENUTZERHANDBUCH MODELL: DT450 Wir sind weiterhin bestrebt, Ihnen Werkzeuge zu wettbewerbsfähigen Preisen anzubieten. „Sparen Sie die Hälfte“, „Halber Preis“ oder andere ähnliche Ausdrücke, die wir verwenden, stellen nur eine Schätzung der Ersparnis dar, die Sie beim Kauf bestimmter Werkzeuge bei uns im Vergleich zu den großen Topmarken erzielen können, und decken nicht unbedingt alle von uns...
Seite 26
Dies ist die Originalanleitung. Bitte lesen Sie alle Anweisungen sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. VEVOR behält sich eine klare Auslegung unserer Bedienungsanleitung vor. Das Erscheinungsbild des Produkts richtet sich nach dem Produkt, das Sie erhalten haben. Bitte verzeihen Sie uns, dass wir Sie nicht erneut informieren,...
Machine Translated by Google Warnung-Um das Verletzungsrisiko zu verringern, muss der Benutzer Lesen Sie die Bedienungsanleitung sorgfältig durch. KORREKTE ENTSORGUNG Dieses Produkt unterliegt den Bestimmungen der europäischen Richtlinie 2012/19/EU. Das Symbol einer durchgestrichenen Mülltonne durch bedeutet, dass das Produkt einer getrennten Entsorgung unterliegt Sammlung in der Europäischen Union.
Machine Translated by Google TEILELISTE A M8*20 B M8 C M7*60 E M5*8mm ÿ7*ÿ10*60 mm Fixiert auf die Abdeckung 4 STK 4 STK 6 STK 6 STK 6 STK F M5*10mm H M6*30mm Ich M6 G Ausblendung ÿ6 * ÿ16 * 1 mm Kappe 4 STK 4 STK...
Seite 29
Machine Translated by Google ANWEISUNGEN SCHRITT 1: Entfernen Sie zuerst die Abdeckung. SCHRITT 2 Obere und untere Racks installieren und befestigen: Das Chassis mit dem Pylon verbinden. Die Löcher des Pylons an den oberen und unteren Löchern des Chassis ausrichten und mit vier Schrauben und Muttern befestigen.
Seite 30
Machine Translated by Google SCHRITT 3 Platzieren Sie den Trägerbalken an der Montageposition, markieren Sie die Löcher und bohren Sie Löcher, stecken Sie vier Expansionsrohre in die Löcher und befestigen Sie den Hauptkörper des Trägers durch die Wandplatte. SCHRITT 4 Befestigen Sie den Gehäusedeckel: Richten Sie die linken und rechten Löcher des Gehäusedeckels an den Löchern im Gehäuse aus und befestigen Sie sie mit sechs Senkkopfschrauben.
Seite 31
Machine Translated by Google SCHRITT 5 Montieren Sie die Halterung. ÿ Stecken Sie die beiden Balken in die beiden Löcher an der Ober- und Unterseite des Hakens und befestigen Sie die Dübel an beiden Enden der Balken mit Schrauben. ÿ Verbinden Sie die oberen und unteren vier Löcher der Montageplatte mit den mittleren vier Löchern des Balkens durch Schrauben und Muttern.
Seite 32
Machine Translated by Google SCHRITT6 Angeschlossenes Fernsehgerät ÿ Wählen Sie die entsprechenden Löcher für die beiden vertikalen Haken der montierten Halterung und verbinden Sie die Halterung mit den Löchern auf der Rückseite des Fernsehgeräts. ÿ Montieren Sie die Sicherheitsschrauben jeweils oberhalb und unterhalb der beiden Haken.
Seite 33
Machine Translated by Google SCHRITT 7 Anschlussadapter...
Seite 34
Machine Translated by Google DURAL KONTROLLWEGE...
Seite 35
Machine Translated by Google PRODUKTPARAMETER Sicheres Laden Adaptereingang Modell Region Eingang Gewicht Stromspannung Amerika 100 – 240 V~ Gleichstrom 29 V DT450 88 Pfund 1,8 A 50/60 Hz Europa...
Seite 36
Machine Translated by Google Technischer Support und E-Garantie-Zertifikat www.vevor.com/support...
Seite 37
Machine Translated by Google Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support ASCENSORE TV MANUALE D'USO MODELLO: DT450 Continuiamo a impegnarci per fornirvi strumenti a prezzi competitivi. "Risparmia la metà", "Metà prezzo" o qualsiasi altra espressione simile da noi utilizzata rappresenta solo una stima del risparmio che potresti ottenere acquistando determinati utensili con noi rispetto ai principali marchi principali e non significa necessariamente coprire tutte le categorie di utensili da noi offerti.
Seite 38
Questa è l'istruzione originale, si prega di leggere attentamente tutte le istruzioni del manuale prima di utilizzare. VEVOR si riserva una chiara interpretazione del nostro manuale utente. L'aspetto del prodotto sarà soggetto al prodotto ricevuto. Vi preghiamo di perdonarci se non vi informeremo di nuovo se ci sono aggiornamenti tecnologici o software sul...
Machine Translated by Google Attenzione: per ridurre il rischio di lesioni, l'utente deve leggere attentamente il manuale di istruzioni. SMALTIMENTO CORRETTO Questo prodotto è soggetto alle disposizioni della Direttiva Europea 2012/19/UE. Il simbolo raffigurante un bidone della spazzatura barrato attraverso indica che il prodotto richiede un rifiuto separato raccolta nell'Unione Europea.
Machine Translated by Google ELENCO DELLE PARTI Un M8*20 Si M8 C M7*60 E M5*8mm ÿ7*ÿ10*60mm Fissato sul Copertina 4 PZ 4 PZ 6 PZ 6 PZ 6 PZ M5*10mm Io M6 Altezza M6*30mm G Soppressione ÿ6*ÿ16*1mm berretto 4 PZ 4 PZ 8 PZ 4 PZ...
Seite 41
Machine Translated by Google ISTRUZIONI FASE 1 Per prima cosa rimuovere il coperchio. PASSO 2 Installare e fissare i rack superiore e inferiore: collegare il telaio al pilone. Allineare i fori del pilone con i fori superiore e inferiore del telaio e fissarli utilizzando quattro bulloni e dadi.
Seite 42
Machine Translated by Google FASE 3 Posizionare la trave del supporto nella posizione di installazione, contrassegnare i fori e praticarli, inserire quattro tubi di espansione nei fori e fissare il corpo principale del supporto attraverso la piastra a parete. PASSO 4 Fissare il coperchio dell'alloggiamento: allineare i fori sinistro e destro del coperchio dell'alloggiamento con i fori sull'alloggiamento e fissarli utilizzando sei viti a testa svasata.
Seite 43
Machine Translated by Google PASSO 5 Installare la staffa ÿ Inserire le due travi nei due fori sui lati superiore e inferiore del gancio e fissare i tasselli su entrambe le estremità delle travi utilizzando delle viti. ÿ Collegare i quattro fori superiori e inferiori della piastra di montaggio ai quattro fori centrali della trave tramite bulloni e dadi.
Seite 44
Machine Translated by Google PASSO6 TV collegata ÿ Selezionare i fori appropriati per i due ganci verticali della staffa assemblata e collegare la staffa ai fori sul retro del televisore. ÿ Installare le viti di sicurezza rispettivamente sopra e sotto i due ganci.
Seite 45
Machine Translated by Google PASSO 7 Adattatore di collegamento...
Seite 46
Machine Translated by Google MODI DI CONTROLLO DURALE...
Machine Translated by Google PARAMETRI DEL PRODOTTO Caricamento sicuro Ingresso adattatore Modello Regione Ingresso Peso voltaggio America DC29V 100-240V~ DT450 88 libbre 1.8A Frequenza 50/60 Hz Europa...
Seite 48
Machine Translated by Google Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support...
Seite 49
Machine Translated by Google Soporte t écnico y c ertificado d e g arantía e lectrónica w ww.vevor.com/support ELEVADOR D E T V MANUAL D EL U SUARIO MODELO: D T450 Seguimos c omprometidos a b rindarle h erramientas a p recios c ompetitivos.
Seite 50
A sistencia t écnica y c ertificado d e g arantía e lectrónica www.vevor.com/support Estas s on l as i nstrucciones o riginales, l ea a tentamente t odas l as i nstrucciones d el manual a ntes d e u tilizar e l p roducto. V EVOR s e r eserva u na i nterpretación c lara d e n uestro ...
Machine Translated by Google Advertencia: P ara r educir e l r iesgo d e l esiones, e l u suario d ebe l eer Lea a tentamente e l m anual d e i nstrucciones. ELIMINACIÓN C ORRECTA Este p roducto e stá s ujeto a l as d isposiciones d e l a D irectiva e uropea 2012/19/UE. ...
Machine Translated by Google LISTA D E P IEZAS Un M 8*20 BM8 C M 7*60 E M 5*8 m m Φ7*Φ10*60 m m Fijo e n e l Cubrir 4 p iezas 4 p iezas 6 p iezas 6 p iezas 6 ...
Seite 53
Machine Translated by Google INSTRUCCIONES PASO 1 P rimero r etire l a c ubierta. PASO 2 Instalación y f ijación d e l os b astidores s uperior e i nferior: Conecte e l c hasis a l p ilono. A linee l os o rificios d el p ilono c on l os o rificios s uperior e inferior ...
Seite 54
Machine Translated by Google PASO 3 Coloque l a v iga d el s oporte e n l a p osición d e i nstalación, m arque l os a gujeros y t aladre agujeros, c oloque c uatro t ubos d e e xpansión e n l os a gujeros y f ije e l c uerpo p rincipal d el soporte ...
Seite 55
Machine Translated by Google PASO 5 Instalar e l s oporte Inserte l as d os v igas e n l os d os o rificios d e l os l ados s uperior e i nferior d el g ancho y asegure ...
Seite 56
Machine Translated by Google PASO 6 Televisor c onectado S eleccione l os o rificios a decuados p ara l os d os g anchos v erticales d el s oporte ensamblado y c onecte e l s oporte c on l os o rificios e n l a p arte p osterior d el t elevisor. ...
Seite 57
Machine Translated by Google PASO 7 Adaptador d e c onexión...
Seite 58
Machine Translated by Google MEDIOS D E C ONTROL D URAL...
Machine Translated by Google PARÁMETROS D EL P RODUCTO Carga s egura Entrada d el a daptador Modelo Región Aporte Peso Voltaje América 29 V C C 100240 V ~ DT450 88 l ibras 1.8A 50/60 H z Europa...
Seite 60
Machine Translated by Google Soporte t écnico y c ertificado d e g arantía electrónica w ww.vevor.com/support...
Machine Translated by Google Wsparcie techniczne i certyfikat gwarancji elektronicznej www.vevor.com/support Podnośnik TV INSTRUKCJA OBSŁUGI MODEL: DT450 Nadal staramy się oferować Państwu narzędzia w konkurencyjnych cenach. „Oszczędzaj połowę”, „Połowa ceny” lub inne podobne wyrażenia używane przez nas stanowią jedynie szacunkowe oszczędności, jakie możesz uzyskać, kupując u nas określone narzędzia w porównaniu z głównymi markami i niekoniecznie oznaczają...
Seite 62
E-Gwarancji www.vevor.com/support To jest oryginalna instrukcja, przed użyciem należy uważnie przeczytać wszystkie instrukcje. VEVOR zastrzega sobie jasną interpretację naszej instrukcji obsługi. Wygląd produktu będzie zależał od produktu, który otrzymałeś. Prosimy o wybaczenie, że nie poinformujemy Cię ponownie, jeśli w naszym produkcie pojawią się jakiekolwiek aktualizacje technologiczne lub...
Seite 63
Machine Translated by Google Ostrzeżenie – aby zmniejszyć ryzyko obrażeń, użytkownik musi przeczytać Przeczytaj uważnie instrukcję obsługi. PRAWIDŁOWA UTYLIZACJA Niniejszy produkt podlega postanowieniom dyrektywy europejskiej 2012/19/UE. Symbol przedstawiający przekreślony kosz na śmieci przez wskazuje, że produkt wymaga oddzielnego składowania zbiórka w Unii Europejskiej. Dotyczy produktu oraz wszystkie akcesoria oznaczone tym symbolem.
Machine Translated by Google LISTA CZĘŚCI M8*20 B M8 C M7*60 Średnica wewnętrzna M5*8mm Φ7*Φ10*60mm Naprawiono na Okładka 4 SZT. 4 SZT. 6 SZT. 6 SZT. 6 SZT. Ja M6 G Zaślepka Wysokość M6*30mm Średnica wewnętrzna M5*10mm Φ6*Φ16*1mm Czapka 4 SZT. 4 SZT.
Seite 65
Machine Translated by Google INSTRUKCJE KROK 1 Najpierw zdejmij pokrywę. KROK 2 Zainstaluj i zamocuj górny i dolny stojak: Podłącz podwozie do pylonu. Wyrównaj otwory pylonu z górnym i dolnym otworem podwozia i zabezpiecz je za pomocą czterech śrub i nakrętek.
Seite 66
Machine Translated by Google KROK 3 Umieść belkę podpory w pozycji montażowej, zaznacz otwory i wywierć je, włóż cztery tuleje rozporowe do otworów i zamocuj główną część podpory przez płytę ścienną. KROK 4 Zabezpiecz pokrywę obudowy: Wyrównaj lewy i prawy otwór pokrywy obudowy z otworami w obudowie i zamocuj je za pomocą...
Seite 67
Machine Translated by Google KROK 5 Zainstaluj wspornik Włóż dwie belki do dwóch otworów na górnej i dolnej stronie haka i zabezpiecz kołki na obu końcach belek za pomocą śrub. Połącz cztery górne i dolne otwory płyty montażowej z czterema środkowymi otworami belki za pomocą...
Seite 68
Machine Translated by Google KROK 6 Podłącz telewizor Wybierz odpowiednie otwory dla dwóch pionowych haków zmontowanego uchwytu i połącz uchwyt z otworami z tyłu telewizora. Zainstaluj śruby zabezpieczające odpowiednio nad i pod dwoma hakami.
Seite 69
Machine Translated by Google KROK 7 Adapter połączeniowy...
Seite 70
Machine Translated by Google SPOSOBY KONTROLI OPONY TWARDEJ...
Seite 71
Machine Translated by Google PARAMETRY PRODUKTU Wejście adaptera Bezpieczne ładowanie Model Region Wejście Waga woltaż Ameryka 100-240 V~ Prąd stały 29 V DT450 88 funtów 1,8 A 50/60Hz Europa...
Seite 72
Machine Translated by Google Wsparcie techniczne i certyfikat gwarancji elektronicznej www.vevor.com/support...
Seite 73
Machine Translated by Google Technische ondersteuning en e-garantiecertificaat www.vevor.com/support TV-LIFT GEBRUIKERSHANDLEIDING MODEL: DT450 Wij streven er voortdurend naar om u gereedschappen tegen concurrerende prijzen te leveren. "Save Half", "Half Price" of andere soortgelijke uitdrukkingen die wij gebruiken, geven alleen een schatting weer van de besparingen die u kunt behalen door bepaalde gereedschappen bij ons te kopen in vergelijking met de grote topmerken en betekent niet noodzakelijkerwijs dat alle categorieën...
Seite 74
Dit is de originele instructie, lees alle handleidingen zorgvuldig door voordat u het product gebruikt. VEVOR behoudt zich een duidelijke interpretatie van onze gebruikershandleiding voor. Het uiterlijk van het product is afhankelijk van het product dat u hebt ontvangen.
Machine Translated by Google Waarschuwing - Om het risico op letsel te verminderen, moet de gebruiker de volgende informatie lezen: Lees de gebruiksaanwijzing zorgvuldig door. CORRECTE VERWIJDERING Dit product is onderworpen aan de bepalingen van de Europese richtlijn 2012/19/EU. Het symbool met een doorgestreepte kliko door geeft aan dat het product gescheiden afval nodig heeft inzameling in de Europese Unie.
Machine Translated by Google ONDERDELENLIJST Een M8*20 B-M8 C M7*60 E-M5*8mm ÿ7*ÿ10*60mm Vastgezet op de Omslag 4 STUKS 4 STUKS 6 STUKS 6 STUKS 6 STUKS F-M5*10mm H-M6*30mm Ik M6 G-Blanken Diameter 6*16*1mm 8STUKS 4 STUKS 4 STUKS 4 STUKS 4 STUKS L M6*10mm M M8*30mm...
Seite 77
Machine Translated by Google INSTRUCTIES STAP 1 Verwijder eerst de kap. STAP 2 Installeer en bevestig de bovenste en onderste rekken: Verbind het chassis met de pylon. Lijn de pylongaten uit met de bovenste en onderste gaten van het chassis en bevestig ze met vier bouten en moeren.
Seite 78
Machine Translated by Google STAP 3 Plaats de balk van de steun op de installatiepositie, markeer de gaten en boor gaten, plaats vier expansiebuizen in de gaten en bevestig het hoofdgedeelte van de steun door de muurplaat. STAP 4 Bevestig het behuizingsdeksel: Lijn de linker- en rechtergaten van het behuizingsdeksel uit met de gaten in de behuizing en bevestig ze met zes verzonken schroeven.
Seite 79
Machine Translated by Google STAP 5 Monteer de beugel ÿ Plaats de twee balken in de twee gaten aan de boven- en onderkant van de haak en bevestig de pluggen aan beide uiteinden van de balken met schroeven. ÿ Verbind de bovenste en onderste vier gaten van de montageplaat met de middelste vier gaten van de balk door middel van bouten en moeren.
Seite 80
Machine Translated by Google STAP 6 Aangesloten tv ÿ Selecteer de juiste gaten voor de twee verticale haken van de gemonteerde beugel en verbind de beugel met de gaten aan de achterkant van de tv. ÿ Plaats de veiligheidsschroeven respectievelijk boven en onder de twee haken.
Seite 81
Machine Translated by Google STAP 7 Aansluitadapter...
Machine Translated by Google DURAL CONTROLE MANIEREN...
Seite 83
Machine Translated by Google PRODUCTPARAMETERS Veilig laden Adapter-ingang Model Invoer Regio Gewicht spanning Amerika DC29V 100-240V~ DT450 88 pond 1.8A 50/60Hz Europa...
Seite 84
Machine Translated by Google Technische ondersteuning en e- garantiecertificaat www.vevor.com/support...
Seite 85
Machine Translated by Google Teknisk support och e-garanticertifikat www. vevor. se/support TV-LIFT ANVÄNDARMANUAL MODELL: DT450 Vi fortsätter att vara engagerade i att ge dig verktyg till konkurrenskraftiga priser. "Spara hälften", "halva priset" eller andra liknande uttryck som används av oss representerar bara en uppskattning av besparingar du kan dra nytta av att köpa vissa...
Seite 86
Detta är den ursprungliga instruktionen, läs alla instruktioner noggrant innan du använder den. VEVOR reserverar sig för en tydlig tolkning av vår användarmanual. Utseendet på produkten är beroende av den produkt du fått. Ursäkta oss att vi inte kommer att...
Machine Translated by Google Varning - För att minska risken för skada måste användaren läsa bruksanvisningen noggrant. KORREKT AVFALLSHANTERING Denna produkt omfattas av bestämmelserna i det europeiska direktivet 2012/19/EU. Symbolen som visar en soptunna korsad genom indikerar att produkten kräver separat avfall insamling i Europeiska unionen.
Seite 88
Machine Translated by Google DELLISTA En M8*20 B M8 C M7*60 E M5*8mm ÿ7*ÿ10*60mm Fast på Täcka 4 st 4 st 6 st 6 st 6 st F M5*10mm H M6*30mm Jag M6 G Blankering ÿ6*ÿ16*1mm Lock 4 st 4 st 8 st 4 st 4 st...
Seite 89
Machine Translated by Google INSTRUKTIONER STEG 1 Ta först bort kåpan. STEG 2 Installera och fixa de övre och nedre stativen: Anslut chassit till pylonen. Rikta in pylonhålen med de övre och nedre hålen på chassit och fäst dem med fyra bultar och muttrar.
Seite 90
Machine Translated by Google STEG 3 Placera balken på stödet till installationspositionen, markera hålen och borra hålen, sätt fyra expansionsrör i hålen och fixera stödets huvuddel genom väggplattan. STEG 4 Säkra höljets kåpa: Passa in de vänstra och högra hålen på höljets kåpa med hålen på höljet och fäst dem med sex försänkta skruvar.
Seite 91
Machine Translated by Google STEG 5 Montera fästet ÿ Sätt in de två balkarna i de två hålen på krokens övre och nedre sidor och fäst pluggarna i båda ändarna av balkarna med skruvar. ÿ Anslut de övre och nedre fyra hålen på monteringsplattan till de fyra mittersta hålen på...
Seite 92
Machine Translated by Google STEG 6 Ansluten TV ÿ Välj lämpliga hål för de två vertikala krokarna på det monterade fästet och anslut fästet med hålen på baksidan av TV:n. ÿ Montera säkerhetsskruvarna ovanför respektive under de två krokarna.
Seite 93
Machine Translated by Google STEG 7 Anslutningsadapter...
Seite 94
Machine Translated by Google DURAL KONTROLLSÄTT...
Seite 95
Machine Translated by Google PRODUKTPARAMETRAR Adapteringång Säker laddning Modell Input Område Vikt spänning Amerika DC29V 100-240V~ DT450 88 pund 1,8A 50/60Hz Europa...
Seite 96
Machine Translated by Google Teknisk support och e-garanticertifikat www. vevor. se/support...