STEINEL Professional L 400 S Bedienungsanleitung Seite 11

GB
Dear Customer,
Congratulations on purchasing your new
STEINEL SensorLight and thank you for the
confidence you have shown in us.
You have chosen a high-quality product that
has been manufactured, tested and packed
with the greatest care.
Please familiarise yourself with these instruc-
Safety precautions
Disconnect the power supply before attempt-
n
ing any work on the light.
During installation, the electrical wiring you
n
are connecting must be dead. Therefore,
switch off the power first and use a voltage
tester to make sure the wiring is off circuit.
Principle 1
The integrated infrared sensor is equipped with
two 120° pyro sensors which detect the invisi-
ble heat emitted by moving objects (people,
animals etc.).
The heat detected is converted electronically
into a signal that switches the light ON auto-
matically. Heat is not detected through obsta-
cles, such. as walls or panes of glass. Heat ra-
diation of this type will, therefore, not trigger
Operation / Maintenance
The SensorLight is suitable for switching light
ON automatically. Weather conditions may af-
fect the way the SensorLight functions. Strong
gusts of wind, snow, rain or hail may cause the
light to come ON when it is not wanted because
tions before attempting to install the Sensor-
Light because prolonged, reliable and trouble-
free operation will only be ensured if it is fitted
and used properly.
We hope your new STEINEL SensorLight will
bring you lasting pleasure.
Installing the SensorLight involves work on
n
the mains voltage supply. This work must
therefore be carried out professionally in ac-
cordance with national wiring regulations and
electrical operating conditions
(DE: VDE 0100, AT: ÖVE / ÖNORM E8001-1,
CH: SEV 1000).
the sensor. The two pyro sensors have an angle
of coverage of 240° with an angle of aperture of
180°.
Important: The most reliable way of detecting
movement is to install the SensorLight with the
sensor aimed across the direction in which a
person would walk and by ensuring that no ob-
stacles (such as trees, walls etc.) obstruct the
line of sensor vision.
the sensor is unable to distinguish sudden
changes of temperature from sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
- 11 -
GB