imilab C30 Dual Benutzerhandbuch Seite 9

6. Adjust the tilt screw on the bracket to position
the camera at the desired angle. Hold and
rotate the camera body to adjust the horizontal
and vertical angles of the fixed field of view
lens.
7. Tighten the axis with a Phillips screwdriver to ensure the camera is stable.
Notes on wall mounting:
1. The wall on which the device is mounted must have a loading capacity
of at least 3 times the weight of the device.
2. To avoid any damages or injuries, the device must be securely fastened
to the floor/wall as specified in the installation instructions.
Disassembly Precautions:
When removing the device, please slide and drag in the direction of the
protruding positioning points on the base to ensure safe disassembly.
07