imilab C30 Dual Benutzerhandbuch Seite 6

• Reset the Device if Required
To connect the camera to another network or pair it to another
account in the app, press and hold the reset button for about 7 seconds
until the indicator blinks orange quickly, indicating the camera is restored to
factory settings. Then, reconnect the camera to the app.
Note: The content on the MicroSD card will not be deleted after the camera
is restored to factory settings.
Installing the Device
• Installing the MicroSD Card
Ensure that the camera is disconnected from the power supply. Adjust the
camera lens upward until the MicroSD card slot is revealed. Insert the
MicroSD card into the card slot in the direction as illustrated.
Note:
1. The MicroSD card needs to be purchased separately. The camera can be
used without a MicroSD card.
2. When inserting or removing the MicroSD
card, please disconnect the camera from
the power supply. Use a MicroSD card
from IMILAB or another reputable
manufacturer (up to 256GB). The
recommended read and write speed of the
MicroSD card is at least U1/Class 10.
04
MicroSD