Epropulsion SPIRIT 1.0 Plus Bedienungsanleitung Seite 43

11.4 Maintenance of Electrical Contacts
Clean all electrical contacts with electrical contacts cleaner every two
months, and clean immdiately once there is rusty show up.
11.5 Maintenance Time Table
Regularly maintained in proper manner and used in normal condition, the
outboard can work at its optimal state. The following table shows a general
maintenance frequency, which however may vary according to operating con-
ditions.
Item Operations
Anode Check/Replace
Greasing
points
Propeller
Check/Replace
and pin
The "□" symbol indicates checks may be carried out by users. The "■"
symbol indicates work to be carried out by your dealer.
50 hours
(3 months)
Greasing
Initial
100 hours
(6 months)
□
□
41
Every
200 hours
(12 months)
□ ■
□ ■
□ ■