cecotec CONGA 9590 SPIN REVOLUTION ULTRA POWER HOME Bedienungsanleitung Seite 32

ENGLISH
5. Water inlet
6. Water tank
Please note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This robot vacuum cleaner includes a package designed to protect it during transport.
Take the robot vacuum cleaner out of the box. Keep the original box and other elements
in a safe place, as this will help you prevent damage to the robot vacuum cleaner when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
WARNINGS:
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 4
- If the room to be cleaned is near a balcony or stairs, a physical barrier should be placed to
prevent the robot vacuum cleaner from falling and getting damaged, thus ensuring safe
operation. Fig. 5
- Do not use the robot vacuum cleaner for liquids. Fig. 6.
- Direct exposure to sunlight or heavy light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
location for it to start running again.
Installing the robot vacuum cleaner and the self-emptying base
1. Place the self-emptying base against a wall and leave a minimum free space of 1.5 metres
to the front and 0.5 metres to each side. Fig. 7
2. Plug the self-emptying base to a power socket. Wind and store the remaining cable to
prevent accidents.
3. Install the side brush. Fig. 8
4. Hold down the Start/Pause button for a few seconds.
5. When the indicator light turns on, put the robot vacuum cleaner in the self-emptying base
and make sure the charging terminals of the robot match those of the base. If the light
is flashing blue, it means the battery is not completely charged. To ensure the maximum
62
Conga 9590 Spin Revolution Ultra Power Home
cleaning time, wait until the light turns into steady blue, as this indicates that the battery
is fully charged and that the robot vacuum cleaner is ready to clean. Fig. 9
Note
- Take the robot vacuum cleaner to the self-emptying base if battery is low. The robot
vacuum cleaner may not turn on if battery is too low.
- The robot vacuum cleaner will turn on automatically when placed in the self-emptying
base.
- The robot vacuum cleaner cannot be turned off during recharge.
Installing the mixed tank. Fig. 10
- Open the water-tank silicone lid and carefully fill up the tank while avoiding spillages.
Make sure the lid is properly closed. Never immerse the tank in water or other liquids.
- To install the tank on the robot vacuum cleaner, follow the direction shown in figure 10 and
manually press the tab and push it into the correct position. You will hear a click when it is
properly fixed.
- Install the Spin mops following the direction shown in Figure 10.
Recommendations:
- It is not suggested to use the scrubbing function for first-time use.
- It is recommended to be present when the robot vacuum cleaner is scrubbing.
- In order to achieve perfect scrubbing, it is suggested to moisten the mop before using it.
Wi-Fi connectivity and mobile App
In order to link your robot vacuum cleaner to your mobile phone, you will need to follow the
steps below:
- Automatic-scanning mode:
Download the Cecotec app from Google Play or App Store or scan the QR code on your
robot vacuum cleaner.
If this is the first time you are using the app you will need to register your account,
otherwise log in.
Once in the app, press on the "+" symbol in the top right corner and the "Add device" option.
On your robot vacuum cleaner, press and hold for a few seconds the Home button until the
robot beeps and the buttons change their flashing frequency.
The device will appear on the display, press on it.
Enter the Wi-Fi password to which the mobile device is connected and select "next".
Wait for the connection to complete.
- Manual-connection mode
Download the Cecotec app from Google Play or App Store or scan the QR code on your
robot vacuum cleaner.
If this is the first time you are using the app you will need to register your account,
otherwise log in.
ENGLISH
63
Conga 9590 Spin Revolution Ultra Power Home