Health Advice; Additional Specific Safety Rules - Evolution Sds4-800 Originalbetriebsanleitung

themselves to considerable danger.

HEALTH ADVICE

WARNING! When drilling, sanding, sawing or grinding, dust
particles will be produced. In some instances, depending on
the materials you are working with, this dust can be particularly
harmful to you (e.g. lead from old gloss paint).You are advised to
consider the risks associated with the materials you are working
with and to reduce the risk of exposure.
You should:
-Work in a well-ventilated area.
-Work with approved safety equipment, such as dust masks that
are specially designed to filter microscopic particles.
LABELS & SYMBOLS
WARNING! Do not operate machine if warning and / or
instruction labels are missing or damaged. Contact Evolution
Power Tools for replacement labels.
Symbol
V
A
Hz
Revolutions, strokes, surface
Min
-1
speed, orbits etc. per minute
~
n
0
Waste electrical and electronic
To obtain an additional copy of your manual, please contact
Evolution Power Tools at :
UK
USA
WEB

ADDITIONAL SPECIFIC SAFETY RULES

Do not let familiarity with this product (gained from repeated
use) replace strict adherence to hammer drill safety rules. If you
use this tool incorrectly you could suffer serious personal injury.
1. Hold tools by the insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a 'live'
wire will make exposed metal parts of the tool 'live' and shock
the operator.
2. Always be sure you have a firm footing. Be sure no one is
below you when using the tool in high locations.
3. Hold the tool firmly with both hands. Always use the
side grip.
4. Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool only when
hand-held.
6. Do not touch the bit or the workpiece immediately after
operation; they may be extremely hot and could burn your
skin.
Description
7. Some materials contain chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact. Follow
Volts
material supplier safety data.
Amperes
CAUTION! Always unplug drill from the mains supply before
Hertz
changing the drill bit, servicing, cleaning or adjusting the drill.
SPECIFICATIONS
Alternating Current
Evolution SDS4-800
No Load Speed
Motor (230/110v – 50/60 Hz)
Impact Energy:
Speed Range:
Double Insulated
Machine Weight:
Product Dimensions (HxWxD)
Wear Safety Goggles
Recommended Maximum Duty Cycle:
Max. Drill Diameter (Steel):
Max. Drill Diameter (Concrete):
Wear Ear Protection
Max. Drill Diameter (Wood):
Sound Pressure Level (Under Load):
Do Not Touch
Vibration:
Wear Dust Protection
Restriction of Hazardous
The declared vibration total value has been measured in
Substances Directive
accordance with a standard test method and may be used for
comparing one tool with another.
CE certification
The declared vibration total value may also be used in a
preliminary assessment of exposure.
UKCA Certification
WARNING: The vibration emission during actual use of the
power tool can differ from the declared total value depending
equipment
on the ways in which the tool is used. The need to identify
safety measures and to protect the operator are based on an
estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle, such as the times
the tool is switched off, when it is running idle, in addition to
trigger time).
0870 609 2297
1-866-EVO-TOOL
5
SDS4-800 HAMMER DRILL
www.evolutionpowertools.com
650W
0-1100min
2.8 kg
210mm x 320mm x 85mm
30 mins
13mm
20mm
30mm
Lpa =88.6dB (A)
Lwa =99.6dB (A)
K = 3dB (A)
h 14.015 m/s
a
K 1.5 m/s
1.6J
-1
2
2