Ec Declaration Of Conformity - Evolution Sds4-800 Originalbetriebsanleitung

EC DECLARATION OF CONFORMITY

We, the importer:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close,
Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560,
Carbon-Blanc, Bordeaux, France.
Declare that the product
Part numbers: ZIC-SD6A-20
Evolution: SDS4, SDS4-800
SDS 4 Function Hammer Drill
Complies with the essential requirements of the following
European Directives:
2006/42/EC – Machine Directive
2014/30/EU – EMC Directive (starting from Apr 20th 2016)
2011/65/EU & 2015/863/EU – Restriction of the use of Certain
Hazardous Substances in Electrical and Electric Equipment
Standards and Technical specifications referred to:-
EN 62841-1:2015 • EN IEC 62841-2-6:2020/A11:2020
EN 55014-1:2017+A11:2020 • EN 55014-2:2015
EN 61000-3-2: 2014 • EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
All documentation is held on file at the above address and is
available, on request for review.
Print: Matthew Gavins - Group Chief Executive
Date: 01/03/16
We, the importer:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close,
Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560,
Carbon-Blanc, Bordeaux, France.
Declare that the product
Part numbers: ZIC-SD6A-20
Evolution: SDS4, SDS4-800
SDS 4 Function Hammer Drill
UK legislation_Supply of Machinery (Safety) Regulations
2008;
UK legislation_Electromagnetic Compatibility Regulations
2016;
UK legislation _The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
Standards and Technical specifications referred to:-
EN 62841-1:2015 • EN IEC 62841-2-6:2020/A11:2020
EN 55014-1:2017+A11:2020 • EN 55014-2:2015
EN 61000-3-2: 2014 • EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019 • BS EN 62841-1:2015
BS EN IEC 62841-2-6:2020/A11:2020
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015 • BS EN 61000-3-2: 2014
SDS4-800 HAMMER DRILL
BS EN IEC 61000-3-2:2019
BS EN 61000-3-3:2013+A1:2019
All documentation is held on file at the above address and is
available, on request for review.
Print: Barry Bloomer - CEO
Date: 25/05/21
Please read these operating and safety instructions carefully and
completely. For your own safety, before using this equipment
check that the voltage is correct and that all handles and parts
are firmly secured. If you are uncertain about any aspect of
using this equipment, please contact our Technical Helpline.
Technical Helpline UK
Technical Helpline USA
SDS HAMMER DRILL
Congratulations on your purchase of an Evolution Power Tools
SDS 4 Function Hammer Drill. Please complete your product
registration on line to validate your machine's warranty period
and ensure prompt service if needed. We sincerely thank you for
selecting a product from Evolution Power Tools.
WARRANTY
12 MONTH LIMITED WARRANTY. Evolution power tools reserves
the right to make improvements and modifications to design
without prior notice.
Evolution Power Tools will, within twelve (12) months from the
original date of purchase, repair or replace any goods found to be
defective in materials or workmanship. This warranty is void if the
tool being returned has been used to drill / chisel materials beyond
the recommendations in the Instruction Manual or if the drill has
been damaged by accident, neglect, or improper service. This
warranty does not apply to machines and / or components which
have been altered, changed, or modified in any way, or subjected to
use beyond recommended capacities and specifications. Electrical
components are subject to respective manufacturers' warranties.
All goods returned defective shall be returned prepaid freight to
Evolution Power Tools. Evolution Power Tools reserves the right
to optionally repair or replace it with the same or equivalent item.
There is no warranty – written or verbal – for chisel / drill bits. In
no event shall Evolution Power Tools be liable for loss or damage
resulting directly or indirectly from the use of our merchandise or
from any other cause. Evolution Power Tools is not liable for any
costs incurred on such goods or consequential damages. No officer,
employee or agent of Evolution Power Tools is authorized to make
oral representations of fitness or to waive any of the foregoing
terms of sale and none shall be binding on Evolution Power Tools.
Questions relating to this limited warranty should be directed to the
company's head office, or call the appropriate Helpline number.
3
0870 609 2297
1-866-EVO-TOOL