EcoFlow STREAM Ultra Installationsanleitung Seite 5

• Button
Operation
ON
2s
OFF
2s
RESET IOT
×5
• LED
Power Button
Description
Press and hold the button for 2
seconds to turn on the device.
Press and hold the button for 2
seconds to turn off the device. If solar
or grid power is present, disconnect
the cables before powering off.
Press the button 5 times in quick
succession to reset Bluetooth and
Wi-Fi connections.
AC ON/OFF Button
Operation
AC ON
×1
AC OFF
×1
- System Status LED
On Blinking
Off
Pattern
×3
- AC Outlet Status LED
Pattern
Description
Press once to enable or disable
the AC outlets.
Carousel white
Description
Indicates the device is
powered off.
Indicates the current battery
level.
Indicates the device is being
charged.
Indicates the device is faulty.
Check the EcoFlow app for
further instructions.
Indicates a setting has been
applied, such as a system reset
or internet setup completion.
Indicates the device is
upgrading firmware.
Description
At least 1 AC outlet is
enabled.
AC outlets are disabled.
|3
en