EuroLite LED PIXEL MATRIX PANEL 2x5 RGB/WW Bedienungsanleitung Seite 35

Prev/Next
This function enables faster DMX addressing (previous/next).
Chan Mode
With this function, you can set the desired DMX channel mode.
MODE
Auto Mode
With the function Auto Prog, you can set the Auto program (Prog1 – Prog 9) and you can adjust the Auto
Speed (000-255).
Manual Mode
This function can be used to set 15 different programs manualy (000-255). (see Menu structure)
M/S Choose
You can use this function to define the device as a master or slave device.
DISP
Screen saver
You can use this function to set the display mode. (see Menu structure)
Screen Rev.
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling. (NO/YES).
Screen Light
This function can be used to set the brightness of the display. (001-010).
Screen Lock
With the function "OFF" you can lock the display. If you select "ON", the display does not switch off.
ADVA
Network 2.x.x.x – Comm Choose
This function can be used to set the control protocol (DMX/NET and DMX/Art-Net).
Network 2.x.x.x – IP Address
This function can be used to set a fixed IP (Static).
Network 2.x.x.x – Subnet Mas
This function can be used to set the subnet mask of the device´s network address.
Network 2.x.x.x – Universe
This function can be used to set the Universe.
Network 2.x.x.x – DHCP
This function can be used to set DHCP.
Network 2.x.x.x – sACN
This function can be used to switch sACN, special form of Art-Net (ON/OFF).
Data hold
With this function, you can hold the DMX value (ON) or the device is switched dark, if no DMX signal is
received. (OFF)
35/44
00159041, Version 1.0