Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ShOT abRaSIVe
7
8
Shot abrasive
Different floors require different shot abrasives. Below is some information about the most
common abrasivesl
Standard
Standard
BSS 2451
SAE J444a
S460
S460
S390
S390
G34-G37
Maintenance and cleaning
Part
Bearings
Joints and
Height adjustment
Belt drive
Cleaning
Grain size
1,8-2,2 mm
1,0-1,7 mm
0,85-2,0 mm
Description
– All ball bearings are lubricated for life.
– All joints must be lubricated periodically with commercially
available machine grease.
– The belts must be checked at intervals of approximately 30
operating hours and replaced if necessary.
– Regular cleaning of the machine increases the service life of
all machine components and tools.
Application
Blasting concrete and coa-
tings or paint.
Blasting concrete if a fine
profile is required
Shotblasting stubborn coa-
tings on concrete or steel.
G34-G47 may only be added
to S460 / 390.
The mixing ratio must not ex-
ceed 30% G43-G47!
21
Werbung
