Dyon SMART 32 VX V2 Bedienungsanleitung Seite 70

Important!
The device switches itself to standby mode after 4 hours
without operation.
Please note that this is NOT a defect, but a legal
requirement.
A notice will appear shortly before the unit shuts down.
Press any key to avoid this.
Alternatively, switch the device off and on again via the
main switch to reactivate it.
In the system settings
(MENU button - Settings - Timer settings -Sleep timer)
this function can be deactivated by setting it to "OFF".
Attention!
Deactivating the automatic standby or extending the pre-
set shutdown time results in higher power consumption.
Note
The available modes are designated below as follows,
where available
Automatic standby
Automatic networked
standby
11
DYON SMART 32 VX V2
Standby
Network Standby