Dyon SMART 32 VX V2 Bedienungsanleitung Seite 80

7.5 Antenna connection
Connection with antenna or cable
Connect the signal cable (e.g. the antenna cable) to the
antenna input (DVB-T27-C(Cable)) on the back of the unit.
After connecting, switch on the unit. Press the MENU key,
select Settings, select Stations and then Automatic Search.
Select Change settings, now select the desired reception mode
and press the OK key to confirm the selection. Press the
button to continue, make the settings and perform the
channel search.
Note on DVB-T
Whether and how many channels can be received
depends on the location where the unit is used and the
availability of DVB-T transmitters in this region.
DVB-T radio stations are only available in very few
regions.
Please note that when using DVB-T, a new channel
scan should be carried out each time you move to a
larger location. Broadcast stations and their transmission
frequency vary from region to region.
21
DYON SMART 32 VX V2