Dyon SMART 32 VX V2 Bedienungsanleitung Seite 107

17 Troubleshooting
If you have any problems with this unit or its installation, please
look again carefully at the relevant section in this instruction
manual and read details in the table below.
17.1 Error messages
Problem
No picture
„No signal"
display
No sound
Sound, but no
picture
Canal cannot
be seen
Channel lock
code forgotten
DYON SMART 32 VX V2
Possible cause
Mains plug not in the
socket.
Unit is not switched
on.
Antenna cable is not
connected.
Incorrect setting.
Audio cable not
connected or not
connected correctly.
Sound is muted.
Wrong soundtrack
chosen.
AV cable not
connected or not
connected correctly.
This is a radio
channel.
Channel is encrypted.
Proposed solution
Insert the mains
plug into the
socket.
Switch on the unit.
Connect the
antenna cable.
Set the parameters
correctly.
Connect the audio
cable correctly.
Adjust the volume.
Choose a different
soundtrack.
Connect the AV
cable correctly.
Press TV/RADIO to
switch to TV mode.
Select an
alternative channel.
Install the channel
again, thus
48