Philips HD3715 Bedienungsanleitung Seite 20

20
English
Removing the cooling element
The cooling element inside the appliance contains a substance that may pollute
the environment. Therefore you must remove the cooling element before you
discard the appliance.
You can also take or send the appliance to a Philips service centre. The staff of
this centre will remove the cooling element for you and will dispose of it in an
environmentally safe way.
Only remove the cooling element when you discard the appliance.
Be careful of the paste on the cooling element and adjacent parts. If this paste
ends up on your clothes, it causes a permanent stain.
Remove the cooling element in the following way:
1 Unplug the appliance.
2 Slide the release button to the right to open the doors.
There are two holes near the hinges of the doors on either side.
3 Remove the four screws located in these holes with a screwdriver.
4 Remove the back cover from the appliance.
5 Pull the cooling fan out of the appliance.
Now you see an aluminium plate with fins on it and with two screw holes.