CONDTROL Auto Rotolaser Bedienungsanleitung Seite 15

All manuals and user guides at all-guides.com
EN
RotaRy laseR
1. Press button
2. Press button
signal is enabled – symbol
3. Press button
1) high accuracy ±1.5mm/40m. Symbol
2) normal accuracy ±2.5mm/40m. Symbol
Expand sensor of laser receiver towards the laser beam and move
laser receiver down/up arrows on the display. For convenience, you
can use the screen on the back of the detector. Down arrow on the
display indicates that laser receiver should be lowered. The up arrow
on the display indicates that laser receiver needs to be lifted up. When
the marks on the sides of laser receiver are at the same level with the
laser line, symbol
sound signal (if sound signal is enabled) – laser receiver is at the same
level with the laser line.
CONDTROL Auto RotoLaser
to turn on laser receiver.
to turn on/off sound signal. By default sound
appears on the display.
to select required mode –
appears on the display and you hear
user manual
appears on the display
appears on the display.
15