Werbung
Verfügbare Sprachen
Verfügbare Sprachen
added while the litter box is in operation, it will be necessary to restart the litter box by
switching it off and on again.
Connecting the appliance to the mains. Fig. 9
Insert the adapter plug into the port at the back of the appliance, then plug the adapter
1
into a power outlet.
Once connected to the mains, the appliance will perform a self-test and will automatically
2
reboot upon completion.
Note:
a. Remember to fill the litter box with litter before connecting it to the mains.
b. Do not move the litter box or remove any parts during the self-test and rebooting process.
Otherwise, weighing data and cleanliness may be affected.
c.
When you switch on the litter box for the first time, make sure the cat is not in it.
Cleaning modes
1. Self-cleaning mode
When the cat has finished using the litter box, cleaning will start automatically after a waiting
time of 8 minutes. This time can be modified through the app.
Note: the timeout can be configured from the app.
2. Manual cleaning
Press the Cleaning function button on the appliance to start a cleaning cycle.
Press the Cleaning icon on the app to start a cleaning cycle.
3. Programmable cleaning
Once the appliance is switched on, it will automatically clean itself once every 12 hours.
If, after connecting the appliance to the Wi-Fi network the Sleep mode is activated through the
app, no cleaning cycle will be carried out from 23:00 to 9:00.
4. Sleep mode
Once the appliance is connected to the Wi-Fi network, you can activate the Sleep mode using
the app.
When this mode is activated, the litter box will not perform any automatic cleaning cycles
between 23:00 at night and 9:00 in the morning.
The manual cleaning mode and the Emptying function shall remain available.
During Sleep mode, the appliance will deactivate the beeping and the indicator lights will dim.
PUMBA 7000 CLEANKITTY COMPACT CONNECTED
ENGLISH
43
Werbung
