cecotec PUMBA 7000 CLEANKITTY COMPACT CONNECTED Bedienungsanleitung Seite 42

ENGLISH
Sleep mode: this icon allows you to activate and deactivate the Sleep mode (23:00~9:00).
Using the litter box
Installation
Place the appliance on a flat, stable surface. Make sure that all four feet are in contact with
1
the floor.
If you want to use a mat to prevent the floor from filling with sand, be sure to place it in
2
front of the litter box, without touching it.
Prevent the litter box from coming into contact with other objects. Otherwise, it may affect
3
the functioning of the weight sensors.
Placing the rubbish bag
Follow the instructions in figure 6 to fit or replace the rubbish bag.
Press the Cleaning function button.
Please note: do not cover the infrared sensors on both sides of the waste tank with rubbish
bags.
Fig. 6 key
Infrared sensors
1
Adding litter
Method 1:
(Fig. 7).
Remove the litter compartment from the base and add cat litter inside.
Note: this appliance is compatible with bentonite-bonded sand, tofu clumping cat litter (≤1.5
cm) and mixed sand.
Then, press the Cleaning function button to start the appliance.
Method 2:
(Fig. 8).
Add the litter directly into the litter compartment without removing it. Then, press the Cleaning
function button to start the appliance.
Note:
After adding cat litter or changing the rubbish bag, press the Cleaning function button to
1
update the device's weighing data, otherwise automatic cleaning will not be performed.
Do not add cat litter while the litter box is in operation to avoid interruptions. If litter is
2
42
PUMBA 7000 CLEANKITTY COMPACT CONNECTED