en
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the vacuum
cleaner bag when doing so.
Replacing the AirClean Plus 50,
Silence AirClean 50, Active AirClean
50 and HEPA AirClean 50 exhaust fil-
ters (Fig. 31 + 32)
Do not use more than one exhaust
filter at a time.
Open the dust compartment lid. (Fig.
24)
If you wish to fit an AirClean exhaust
filter, see "Replacing one type of ex-
haust filter with another".
Pull the exhaust filter forwards and re-
move it upwards. (Fig. 31)
Insert the new exhaust filter down-
wards, making sure it goes in properly,
then press it backwards on both sides
until it clicks into place. (Fig. 32)
Damage due to contamination in
the dust compartment.
Large quantities of dust may get into
the dust compartment and damage
components if the vacuum cleaner
bag has not clicked into position.
Before closing the dust compartment
lid, always make sure that the va-
cuum cleaner bag has been inserted
and the catch element is closed.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the vacuum
cleaner bag when doing so.
46
Replacing one type of exhaust filter
with another (Fig. 33)
Do not use more than one exhaust
filter at a time.
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
When changing the filter, please note
1. If you wish to replace exhaust filter a
with filter b, c, d or e, it is essential
that you remove the filter grille be-
fore you fit the new exhaust filter.
2. If you wish to replace exhaust filter b,
c, d or e with filter a, it is essential
that you also fit the filter grille (Fig.
29), see the "Filter" section in "Op-
tional accessories".
Cleaning the motor protection filter
(Fig. 34 + 35)
Open the dust compartment lid.
(Fig. 24)
Remove the vacuum cleaner bag.
(Fig. 25)
Release the motor protection filter
forwards and remove it upwards from
the dust compartment. (Fig. 34)