Auriol 4-LD6754-1 Bedienungs- Und Sicherheitshinweise Seite 13

select the temperature unit of degrees Celsius (°C) or
degrees Fahrenheit (°F).
MAX.MIN values
The maximum and minimum temperature and humidity values
are stored from the time the batteries are inserted.
Display MAX.MIN recording
• In the normal display, press the MAX.MIN/Up button,
. MAX will appear, and the recorded maximum
temperature and humidity values will be displayed.
• Press the MAX.MIN/Up button,
will appear, and the recorded minimum temperature and
humidity values will be displayed.
• Wait approx. 10 seconds for the product to return to the
normal display, or press the MAX.MIN/Up button,
Deleting the MAX.MIN record
• In the normal display, press the MAX.MIN/Up button,
. MAX will appear.
• Press and hold the MAX.MIN/Up button,
• The maximum and minimum temperature and humidity
values will be deleted, and recording will start again from
that point onwards.
• Wait approx. 10 seconds for the product to return to the
normal display, or press the MAX.MIN/Up button,
Battery level warning indicator
When the batteries become too low to keep the device run-
ning, the battery level indicator,
above the room temperature,
Replace the batteries as soon as possible.
, repeatedly. MIN
.
, will appear on the display
.
- 22 -
Troubleshooting
Problem
No display
LLL/HHH display
Incorrect display
Cleaning instructions
Improper cleaning can damage the product. Do not immerse
the product in water or other liquids. Avoid any aggressive
cleaning agents, brushes with metal or nylon bristles, or any
sharp or metallic cleaning objects such as knives, hard spatulas
.
and the like. These can damage the surface. Clean the product
with a soft, dry, lint-free cloth, such as that used for cleaning
glasses lenses.
Storage
If the product is not used for a long time, remove the batteries,
clean and store the product away from sunlight in a dry, cool
place, preferably in the original packaging.
Disposal
.
The product and packaging material are recyclable.
Please dispose of them separately for better waste
management. To learn options for disposal of the used
product, please contact your municipal or city admi-
nistration.
Check the labelling on the packaging material
when separating waste – they are marked
with abbreviations (a) and numbers (b) with the
Solution
• Check the batteries.
• The values are outside the
measuring range.
• Check the batteries.
• Restart the product.
- 23 -