exceeded or not reached, ALERT,
alarm signal,
, will flash.
•
Press any button to switch off the red LED alarm signal,
. ALERT,
, will continue to flash until the humidity
has returned to a normal value, e.g., due to ventilation.
•
Press the ON/OFF, ALERT button,
humidity alarm.
ALERT,
, will disappear from the display.
Setting the mould warning
•
In the normal display, press and hold the °C/° F/Down
button,
. The upper limit value for the room humidity,
, and the symbol for mould warning,
•
Set it with the °C/°F/Down button,
MIN/Up button,
•
After about 10 seconds, the set value will be accepted,
and the product will return to the normal display. As soon
as the set values are exceeded, the symbol for the mould
warning,
, and the red LED alarm signal,
flash.
•
Press any button to make the red LED alarm signal,
only light up approx. every 7 seconds. The mould war-
ning symbol,
, will continue to flash until the humidity
has fallen below the set value again, e.g., due to venti-
lation.
, and the red LED
, to disable the
, will flash.
, or the MAX.
.
- 20 -
Flu and heat index
, will
,
Flu alert Indicator
Your product is equipped with a flu alert indicator. If the flu alert
symbol,
by heating.
Heat warning indicator
Your product is equipped with a heat warning indicator. If the
heat warning symbol,
situation, e.g., by ventilating the room.
Setting the temperature unit °C/°F
•
In the normal display, press the °C/°F button,
, flashes on the display, remedy the situation, e.g.,
, flashes in the display, remedy the
- 21 -
, to