GEZE TS 5000 E-ISM Montageanleitung Seite 14

Mounting and securing
6.7 Adjusting trigger and block
Ensure that the wire cable is not pinched.
X
X
When adjusted correctly, the disc and the notch must be aligned.
Measure distance between disc and notch
X
X
Open fixed leaf and hold in place
X
X
Tension wire cable by "X"
X
X
à one rotation of set screw = approx. 1 mm distance
Close fixed leaf and check adjustment (4.).
X
X
6.8 Mount sliding lever to moving leaf and connect with sliding block
Connect sliding lever with door closer (tightening torque 14 Nm) (1.).
X
X
Connect sliding lever to sliding block (tightening torque 5 Nm) (2.).
X
X
Open moving leaf and hold in place (3.).
X
X
GB 6
(1.).
(2.).
(3.).
Fig.: 6.8.1 Fig.: 6.8.2
TS 5000 E-ISM
Fig.: 6.7.1
Fig.: 6.8.3