Before First Use - AEG FAVORIT 99015 VI Benutzerinformation

BEFORE FIRST USE

1. Press the on/off button to activate the
appliance.
2. The display shows the default lan-
guage: LANGUAGE ENGLISH.
• Press OK START to confirm.
• Press one of the menu buttons to
set a different language and then
press OK START to confirm.
3. Press OPTION to close the menu op-
tion.
4. Make sure that the current setting of
the water softener agrees with the wa-
ter hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
5. Fill the salt container.
6. Fill the rinse aid dispenser.
7. Open the water tap.
8. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do
not load the baskets.
If you use the combi detergent
tablets, activate the multitab func-
tion. These tablets contain deter-
gent, rinse aid and other added
agents. Be sure that these tablets
are applicable to the water hard-
ness in your area. Refer to the in-
structions on the packaging of the
products.
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
ADJUSTING THE WATER
SOFTENER
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. Refer
to the table to adjust the water softener
to the right level. It makes sure that the
water softener uses the correct quantity of
dishwasher salt and water.
You must adjust the water soften-
er manually and electronically.
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
ENGLISH
33
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3