Herunterladen Diese Seite drucken

Blumfeldt Swiftwave Bedienungsanleitung Seite 20

Werbung

EN
20
SAFETY INSTRUCTIONS
Read the manual before using the heater. Keep the manual and ensure
that it remains with the heater if you pass it on to a new owner.
Before use, check that the heater and all accessories supplied are
complete and undamaged.
The heater must be installed in accordance with the installation
instructions. The heater must be plugged into a socket that meets the
following requirements AC 230V, frequency 50/60Hz.
The heater is for indoor use only. Do not use it outdoors!
Do not leave the heater unattended while it is in use. Keep the heater out
of the reach of children: risk of burns.
Do not use an external controller with the heater. Do not leave the heater
unattended.
Do not use the heater near flammable or explosive materials: risk of fire
or explosion.
It is strictly forbidden to insert objects into the heater's protective grille:
risk of electric shock.
Do not touch the metal housing as it becomes hot when the heater is
in use: risk of burns. Allow the heater to cool before switching it off and
storing it.
Unplug the heater if it is not to be used for an extended period of time.
Ensure that the electric heater is in good condition and undamaged
before each use. Do not connect or use the heater if the casing, cord or
plug is damaged.
The heating element may be damaged if the heater is dropped or
knocked. Check that the element is undamaged before each use. Do not
use the heater if the element is broken.
Disconnect the plug from the socket when moving or cleaning the heater.
When disconnecting, first turn off the switch and then pull out the plug.
Do not pull on the cable.
Unauthorised dismantling of the electric heater is strictly prohibited. If
the heater is damaged, contact a qualified service technician.
The product is intended for domestic use only.
During use, do not touch the surface of the appliance with bare skin: risk
of burns.
Do not use the socket of the heater together with other appliances: risk
of fire due to excessive load.
WARNING: Never cover the heater. Covering the heater increases the
risk of overheating and fire.
Do not place the heater directly underneath an electrical outlet.
If the power cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person to avoid danger.
Do not use an extension cord as it may overheat and cause a fire hazard.
This heater is not intended for use in bathrooms, laundry rooms or similar
areas where moisture may be present. Never place the heater where it
may fall into a bathtub or other water container.

Werbung

loading

Diese Anleitung auch für:

1004646310046464