Access EASY FILL Benutzerhandbuch Seite 6

2.4 Use of each function button
•
2.4.1 Power button
When the device is off, long press the power button to switch it on.
When the device is on, long press the power button to switch it off.
•
2.4.2 Setting button
With the device switched on, short press the setting button to select the four preset temperatures, as shown in
Figure (a).
Long press the setting button and then short press it to switch between the three options shown in Figure (b).
•
2.4.3 Trigger
After determining the temperature required in the main interface, press the trigger short for heating. After
heating, press the trigger long to push the gutta percha. When changing mode, press the trigger to confirm
the current option and execute.
2.5 Functional operation description
•
2.5.1 Main interface
1. After entering the main interface, the default temperature value (T), the remaining gutta percha amount
(GP) and the actual power of the battery are displayed on the display screen as shown in the figure.
2. Battery icon:
The figure below shows the battery power display icon, which is dynamic during battery charge.
80-100%
electric charge
Caution : This icon indicates the remaining battery power. During gutta percha filling, the battery power
will decrease.
•
2.5.2 Operation Interface
Long press the setting button to enter the operation interface:
percha removal and reset), 2 EXIT return to the main interface). Press the setting button to select EXIT (return
6
60-80% electric 40-60%
charge electric charge
: 0-20% charge, the battery is
20-40% electric
depleted. Please charge the
charge
1 RELOAD GP (automatic residual gutta
device immediately.