SAFETY AND CAUTIONS
Before operating this equipment, carefully read
and follow these safety cautions.
Ensure filters are inserted before running unit.
Running the unit without filters may shorten
the lifespan of the unit and cause electric
shock or injury.
Be sure foreign objects are NOT inserted into
the vents on the unit.
Objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit
with wet hands.
The high voltage may cause electric shock.
Ensure unit intake and outlet vents do not
become blocked.
Blockage may lead to increased internal
temperatures causing product failure and
deformation.
Do not use the unit as a step stool or place
heavy objects on it.
Personal injury may occur or product failure
and deformation.
W A R N I N G
Follow these instructions to reduce the
risk of serious injury or death and to
reduce risk of damaging the unit.
If the supply cord is damaged, it
must be replaced by a special cord
or assembly available from the
manufacturer or its service agent.
This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Children should be supervised to
ensure that they do not play with the
appliance.
Cleaning and user maintenance shall
not be made by children without
supervision.
Before cleaning or maintaining,
ensure unit is unplugged.
2
Do not pull on the power cord when
unplugging the unit.
Do not tie or knot the power cord
when unit is in operation.
If the unit becomes submerged
in water, unplug it and contact
customer service.
Do not unplug or move the unit while
in operation.
Do not plug additional appliances
into the same outlet or power supply.
Do not touch the plug with wet
hands.
Unplug the unit when not in
operation for extended periods of
time.
Do not place around heating
elements.
Do not use around mist or fumes
from industrial oil or around large
quantities of metallic dust.
The cord can become damaged by
forcefully bending, pulling, twisting,
bundling, pinching or placing heavy
objects on it.
Do not install in any sort of motor
or transport vehicle. (trucks, boats,
ships, etc)
Do not place in an area with
excessive amounts of noxious
gases.
Do not place near any flammable
materials. (aerosols, fuel, gases etc)
Do not have the unit facing into wind
or drafts.
Do not place below any electrical
outlet.
Do not place in excessively humid
areas where the unit may become
wet.
To reduce the risk of fire or electric
shock, do not use this fan with any
solid-state speed control device.
Do not place unit closer than 30 cm
from the wall during operation. It
may cause condensation to the wall
and the surrounding area.
English