Indication of telephone events on the Lisa-Signolux system
The Lisa-Signolux system can display notifications from your phone (incoming calls, messag-
es, alerts) according to your phone's notification settings. The event icon that is displayed on
the Lisa-Signolux system for this purpose can be freely selected on the app (notification icon).
If your mobile phone is connected to the 'Receiver T Connect' via the local WLAN network,
the Lisa-Signolux system can inform you of incoming calls and messages with the usual light
flashes and an event icon of your choice.
Open the app. In the "Settings" page, select "APP Notify symbol". Give permission for the
notification function according to your phone's user interface.
You will see a list of the installed phone apps, for which you can get notified. Activate the
permission for the »HT-Connect« app.
<
Press the return arrow
on the top left side of the screen. The 8 event icons are displayed.
Select the icon which you wish to appear on the Lisa-Signolux system, when you receive
incoming calls or messages on your phone.
Notes on Android™:
Notifications (incoming phone calls, SMS, Whatsapp) are displayed on the Lisa-Signolux sys-
tem as long as WiFi and the HT Connect app are active - even in standby mode.
Android is a brand of Google LLC.
Notes on iOS:
Due to the more restrictive nature of the iOS operating system, this function is very limited. SMS
and Whatsapp notifications cannot be displayed on the Lisa-Signolux system.
Incoming calls can only be displayed if there is a Wi-Fi connection to the 'Receiver T Connect',
the phone is not in stand-by and the 'HT Connect' app is in the foreground.
Reset
The reset button behind the small aperture (9) serves to reset the the Bluetooth and WiFi
connection settings to their default state. The basic Lisa-Signolux functions, like Individually
linked Lisa-Signolux-transmitters, are not affected by this reset button.
Take a pointed object (e.g. a ballpoint pen), insert it in the reset aperture and then press and
hold the internal switch within the device.
After a few seconds: The blue light lights up in the flash zone. If you now release the button,
the connection settings are reset.
If the reset button continues to be held down, a red light will light up in the flash zone after a
few more seconds. When the button is released, further internal settings are also reset.
English 25