In ZONE A Press [<]or[>] to Power and
Press [0K] to save.
Setting simulated
sun rise and set period:
To allow crops to adjust to either a lights On period or lights Off period,
and sunset period
the lowest dimming
at the lights-Off. The R/S (Rise/Set) period may be set up to 30 minutes.
In ZONE A Press [<]or[>] to R/S and [A]or[v]
and Press [0K] to save.
Setting Auto-dim
and safety shutdown
Auto dim and shutdown;
the lamps will firstly be dimmed
continues
to rise and exceeds
prevent
crop damage.
In ZONE A Press [<]or[>] to Dim and
engage
auto-dim
and Press [0K] to save.
In ZONE A Press [<]or[>] to Stop and
engage
auto-shutdown
Setting Delay time before
If auto-shutdown
has been engaged,
below set threshold
0 — 30 minutes.
In ZONE A Press [<]or[>]
Utes and Press [0K] to save.'
5. Setting pre-set
Setting pre-set Switch On/Off
The controller
has the capacity
per 24 hour period.
Press [0K] to enter Home screen
Press [<]or[>] to ZONE A and [0K] to enter
In ZONE A Press [<]or[>]
ZONE A time setting
In ZONE A stretch setting Press [<]or[>] to first time setting Ü and [A]or[v] to toggle
between
to activate
setting.
may be set. During this period, the light intensity increases
level of the fixture up to the desired intensity and the opposite
if the ambient
to minimum
the second
and Press [0K] to save.
lamp restart after auto-shutdown
and lamps are restarted
to Delay
and
Switch On/Off
and light intensity
and light intensity times
for up to six different
to NEXT and
[0K] to enter
time setting and [check
to select required
to select required
temperature
parameters:
temperature
rises above
dim setting and if the temperature
set threshold
the lamps will shut down
to select required
to select required
the time period after temperature
can be set in 5 minute increments
to select
required
times
set switching/dimming
box symbol] to deactivate
power output
and
a sunrise
from
time period in minutes
the set threshold,
temperature
to
temperature
to
has fallen
from
time period
in min-
times
time
to