EGO STA1700 Bedienungsanleitung Seite 9

SPECIFICATIONS
Cutting Mechanism
Line Diameter
Cutting Width
Maximum Speed
Weight (Without battery pack)
Recommended Operating
Temperature
Storage Temperature
Measured sound power level L
WA
Sound pressure level at operator's
ear L
PA
Guaranteed sound power level L
(measured according to 2000/14/EC)
Front-assist handle
Valuation of
vibration a
h
Rear handle
◾
The above parameters are tested and measured
equipped with power head PH1420E/PHX1600;
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one machine with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
LINE-IQ FEEDING
actual use of the machine can differ from the declared
2.4 mm nylon
values depending on the ways in which the machine is
twist line
used especially what kind of workpiece is processed;
43 cm
and of the need to identify safety measures to protect the
operator that are based on an estimation of exposure in
5400 min
-1
the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the machine
1.58 kg
is switched off and when it is running idle in addition to
the trigger time).
0°C - 40°C
PACKING LIST (FIG. A )
-20°C - 70°C
94.02 dB(A)
DESCRIPTION
K=0.72 dB(A)
(PH1420E)
KNOW YOUR LINE TRIMMER ATTACHMENT (Fig. A)
92 dB(A)
1. Guard
K=3.1 dB(A)
(PHX1600)
2. Line-cutting Blade
3. Release Tab
82.7 dB(A)
K=3 dB(A)
4. Cutting Line
(PH1420E)
5. Trimmer Head (with LINE-IQ Feeding)
86 dB(A)
6. Line-loading Button
K=3 dB(A)
7. End Cap
(PHX1600)
8. String-trimmer Shaft
96 dB(A)
9. 4 mm Hex Key
(PH1420E)
WA
96 dB(A)
guard firmly in place. The guard must always be on the
(PHX1600)
machine to protect the user.
4.06 m/s
2
ASSEMBLY
K=1.5 m/s
2
(PH1420E)
4.33 m/s
2
do not operate this product until the parts are replaced.
K=1.5 m/s 2
Use of this product with damaged or missing parts could
(PHX1600)
result in serious personal injury.
3.91 m/s
2
K=1.5 m/s
2
or create accessories not recommended for use with this
(PH1420E)
line trimmer. Any such alteration or modification is misuse
2.37 m/s
2
and could result in a hazardous condition leading to
K=1.5 m/s 2
possibly serious personal injury.
(PHX1600)
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
LINE TRIMMER ATTACHMENT — STA1700
WARNING:
The vibration and noise emissions during
WARNING:
Never operate the machine without the
WARNING:
If any parts are damaged or missing,
WARNING:
Do not attempt to modify this product
WARNING:
Do not connect to power head until
EN
9