Power Probe DM300AUTO Benutzerhandbuch Seite 4

DM300AUTO
Features
Rotary Switch Position
Continuity / Diode Test
Amperage
Voltage
Resistor
Hz
Making Basic Measurements
Preparation and Caution Before Measurement
Observe the rules
When connecting the test leads to the DUT (Device Under Test) connect the common
test leads before connecting the live test leads; when removing the test leads, remove
the live test leads before removing the common test leads.
Measuring Continuity / Diode Test / LED Test
Dial the switch to
When the voltage is less than 0.800V.
The color of number will change to green and buzzing.
Function
Continuity / Diode / LED Test
Fuse current measurement
In-line current measurement
DC / AC Volt
Cranking Voltage Test
Normal and Smart Alternator Cranking Test
Resistor
Frequency
Duty Cycle
Warnings and
Caution
position.
3
Cautions.
EN