Dishwasher - Indesit DI 420 Installation Und Gebrauch

Loading the Dishwasher
Before placing the dishes in the dishwasher, remove the
larger food particles to prevent the filter from becoming
clogged, which results in reduced performance.
If the pots and pans have baked-on food that is extremely
hard to remove, we recommend that they be allowed to
soak before they are washed. This will eliminate the need
for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean
items on the bottom rack: pots, pans, lids, serving dishes
and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the sides
of the racks in order to avoid blocking the rotation of the top
spray arm.
- Pots, serving bowls, etc. must always be placed top down.
- Deep pots should be slanted to allow the water to flow out.
Cutlery basket
The type of cutlery basket may vary according to the
dishwasher model.
Knives and other utensils with sharp edges must be
placed in the cutlery basket with the points facing
downwards, or they must be positioned horizontally in the
tip-up compartments on the upper rack.
Insert the cutlery into the basket: Position all cutlery items
so that they don't touch.
If the rack has side baskets, the spoons should be loaded
individually into the appropriate slots.
- Especially long utensils should be placed in the horizon-
tal position at the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter
dishware, such as glasses, coffee and tea cups and sau-
cers, as well as plates, small bowls and shallow pans (as
long as they are not too dirty).
The appliance can also be equipped with 1 or 2 tip-up com-
partments onto which you can place mugs and cups, as
well as long sharp knives and serving cutlery.
- Position the dishes and cookware so that they do not get
moved by the spray of water.
How to adjust the Upper rack ...
The top rack can be adjusted using the two rack heights
(top and bottom). To adjust the rack, open up the tabs that
lock the guides and pull out the rack. Arrange the rack with
the back wheels in either the top or bottom position and
then insert it along the guides until the front wheels are on
as well. Close the tabs to lock the rack in place (see Fig. F)
Loading examples for the upper rack
Loading examples for the lower rack
Cutlery basket
1
2
3
Fig. F
4
#
Fig. A
EN