Indesit DI 420 Installation Und Gebrauch Seite 14

Safety Is a Good Habit to Get Into
NOTICE
Carefully read the instructions contained in this manual,
as they provide important information which is essential
to safe and proper installation, use and maintenance of
the appliance.
This appliance complies with the following EEC
directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and
subsequent modifications.
- 97/17/EEC Labelling
-2002/96/EC (Waste Electrical and Electronic Equipment)
1.Carefully dispose of the packing material.
2.After removing the packing, check to make sure that the
appliance is not damaged. If in doubt, contact a qualified
professional.
3.The dishwasher must only be used by adults for the washing
of household dishes and cooking utensils.
4.Fundamental rules to follow when using the appliance:
- Never touch the dishwasher when barefoot or with wet hands
or feet;
- We discourage the use of extension cords and multiple
sockets;
- During installation, the power supply cord must not be
excessively or dangerously bent or flattened;
- If the appliance is not operating properly or maintenance
must be performed, disconnect the appliance from the power
Close-up View (control panel)
"P" Cycle Select
"G" Cycle
Indicator lights
A.
ON-OFF Button
B.
ON - OFF Indicator Light
Button
supply.
5.Keep detergents out of the reach of children, who must also
be kept away from the dishwasher when it is open.
6.This appliance cannot be installed outdoors, not even if the
area in which it is installed is covered by a roof; it is also very
dangerous to leave it exposed to the rain and elements.
7.Do not touch the heating element during or after a wash
cycle.
8.The door should not be left open as it may create a
dangerous obstacle.
9.Do not lean or sit on the door when it is open, as this could
overturn the dishwasher.
10.If the appliance malfunctions, turn off water supply to the
appliance and disconnect the plug from the wall socket. Then,
consult the section entitled, "Troubleshooting." If you cannot
resolve the problem, contact a service centre.
11.Appliances which are no longer being used must be made
inoperable by cutting the power supply cord and removing
the door lock.
To maintain the EFFICIENCY and SAFETY of
this appliance, we recommend:
G call only the Service Centers authorized
by the manufacturer
G always use original Spare Parts
Indicator light
G.
Cycles Indicator Lights
P.
Cycle select button
"B" ON-OFF
"A" ON-OFF
Button
EN