Silvercrest SSM 12 A1 Bedienungs- Und Sicherheitshinweise Seite 9

Never let the power cord become
a trip hazard, ensure no one can
get tangled in it or step on it.
Allow the product to cool down
before moving it to a different
location.
WARNING!
HAZARD OF FIRE!
Do not operate the product
close to or below curtains, wall
cupboards or other inflammable
materials.
Do not use the product on swollen,
burnt, inflamed, diseased or injured
regions of the skin and body areas.
If in doubt, obtain medical advice
before using the product.
Never use the product if you have
injuries or pain in the neck/back
or spine.
No action is needed from users
to shift the product between 50 Hz
and 60 Hz. The product adapts
itself for both 50 Hz and 60 Hz.
Before use
Note: Remove all packaging material from the
product.
Always keep the cover
cushion before use. Only the cover
1
intended to be washed according to "Cleaning
and care" section.
Place the massage cushion
fasten it to the back of the chair with the velcro
strap . Alternatively, place the massage
11
on the massage
10
is
10
on a chair and
1
cushion on a sofa without using the velcro
1
strap .
11
Connect the connection plug
at the back of the massage cushion
Plug the AC-DC adapter
Sit on the chair and ensure the massage
cushion is in the desired position.
1
Operation
Locate the control panel
(see fig. F)
Switch on the massage cushion
the power button on the control panel
5
The green indicator lights near the power but-
ton and inward/outward rotation button
5
switch on.
Press the inward/outward rotation button
select the rotation direction of the massage
heads . The blue indicator light near the in-
2
ward/outward rotation button
when the massage heads
The green indicator light near the inward/out-
ward rotation button
7
massage heads rotate outwards
2
Note: Never use the massage cushion
more than 15 minutes. A longer massage may
lead to tension caused by overstimulation of the
muscles.
Warming function
To complement the massage with the warming
function, press the light and heat function but-
ton to turn on the heat function. The red indi-
6
cator light near the light and heat function
but ton switches on.
6
Note: The warming function can only be ac-
tivated when the massage head
operation.
to the socket
9 4
.
1
into the mains socket.
8
under the cover
3 10
by pressing
1
.
3
7
to
7
switches on
7
rotate inwards.
2
switches on when the
for
1
are in
s 2
GB 9