Starting The Programme; Loading Door Lock - Beko WMY 91446HLB1 Bedienungsanleitung

time, you must press Start / Pause button after
adjusting the time.
If you want to cancel End Time function, press On / Off
button to turn off and on the machine.
C
Do not use
liquid detergents when you activate
End Time function! There is the risk of staining of
the clothes.
1 Open the loading door, place the laundry and put
detergent, etc.
2 Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End
Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts.
":" sign in the middle of the end time on the display
starts flashing.
C
Additional laundry
the End Time countdown period. At the end of
the countdown, End Time indicator turns off,
washing cycle starts and the time of the selected
programme appears on the display.
When the End Time
time appears on the screen consists of end time
plus the duration of the selected programme.

4.9 Starting the programme

1 Press Start / Pause button to start the programme.
2 The Start / Pause button which was off before
starts to illuminate steadily now, indicating that the
programme has started.
3 Loading door is locked. The door lock symbol
appears on the display after the loading door is
locked.
4 Programme follow-up indicator lights on the display
will show the current programme step.

4.10 Loading door lock

There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
"Door Locked" symbol appears on the display when the
loading door is locked.
41 / EN
88
C
0
88:88
1888
may be loaded during
selection is completed, the
88
C
0
88:88
1888
88
0 C
88:88
1888
4.11 Changing the selections after the
programme has started
Adding laundry after the programme has started:
If the water level in the machine is suitable when
you press Start / Pause button, loading door symbol
will flash on the display until the loading door is
opened and will disappear when the loading door is
opened.
If the water level in the machine is not suitable when
you press Start / Pause button, the loading door
symbol remain lit on the display.
Switching the machine to pause mode:
Press the Start / Pause button to switch the machine
to pause mode. Pause symbol will flash on the display.
Changing the programme selection after
programme has started:
The programme change is not allowed when the
current programme is running.
You can select the new programme after switching
the current programme to pause mode.
C
The selected program starts anew.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has reached,
you can cancel or activate the auxiliary functions. See,
"Auxiliary function selection".
You can also change the speed and temperature
settings. See, "Spin speed selection" and "Temperature
selection".
C
The loading door will not open if the water
temperature in the machine is high or the water
level is above the door opening.
Washing Machine / User's Manual
88
0 C
88:88
1888
88
C
0
88:88
1888
88
C
0
88:88
1888