Silvercrest SNOT 1.5 A2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 16

Inserting/replacing the battery
(see Fig. B)
Hold the trimmer body
turn the battery compartment cap
mark ( ) on the battery compartment cap
with the unlock mark " " (see Fig. B) on the bottom of
the trimmer body
Then remove the battery compartment cap
the trimmer body
Remove the used battery
Insert a new battery type AA (LR6) in the trimmer
body (see Fig. C).
7
Indication: Pay attention to the right polarity. This
is indicated on the bottom of the trimmer body
Put the battery compartment cap
trimmer body
Hold the trimmer body
turn the battery compartment cap
wise until the mark ( ) on the battery compartment
cap is aligned with the lock mark (" ") on the
8
bottom of the trimmer body
16 GB
firmly and vertically and
7
.
7
.
7
10
.
7
firmly and vertically and
7
clockwise until the
8
, if present.
back on the
8
counter-clock-
8
.
7
is aligned
8
from
8
.
7