PowerLocus Bobo Benutzerhandbuch Seite 4

Main Operations
Power on: Press and hold the power button for three seconds.
•
Power off: Press and hold the power button for five seconds.
•
Play/pause/answer a call/end a call: Short press the power button.
•
Decline incoming call: Press and hold the power button for two seconds.
•
Skip to the next track: Press and hold the [+] button.
•
Skip to the previous track: Press and hold the [-] button.
•
LED lights activation/deactivation: Double press the multifunction button.
•
Activate voice assistant: Press and hold the multifunction button.
•
Increase volume: Short press the [+] button.
•
Decrease volume: Short press the [-] button.
•
Change the volume sensitivity modes – 74/85/94dB: Short press the [+] and [-] buttons
at the same time to adjust the maximum volume limitation.
LED Indicators
Turning on: The blue LED appears and flashes for two seconds.
•
Turning off: The LED light goes off.
•
Pairing mode: Blue and red LEDs flash alternately.
•
Bluetooth connected: LED light switches from alternately flashing blue/red to
•
blue and it flashes three times every 10 seconds.
Disconnected: Blue and red LEDs flash alternately.
•
Headphones charging status: Red LED is on.
•
Headphones fully charged: Red LED goes off.
•
Headphones Connection via Bluetooth
Long press the ON/OFF button to turn on the headphones. Open the Bluetooth settings
of your device and select "PowerLocus Bobo" to connect the headphones.
Changing the Maximum Volume Limit
The default setting for the maximum volume limit is 85dB. The limit can be adjusted by
short pressing the [+] and [-] buttons simultaneously. The sequence of volume limits will
cycle through 85dB, 94dB and 74dB. Once the volume limit is changed, it will stay the
same until changed manually again.
4