INTEZZE CLIQ Bedienungsanleitung Seite 5

5) Place the earbuds next to each other so that you can see them. After 8–10
seconds both earbuds' LED will flash blue.
6) Now you can repeat the pairing process with your phone.
Precautions
1) In order to connect the charging pins, it is necessary to first remove the
protective film from the earbud pins.
2) Fully charge the case together with the earbuds prior to first use.
3) If you do not use the earbuds for a long time, charge them regularly
together with the case to avoid damaging the batteries (shortening their
service life).
4) Keep the volume at the lowest possible level. Listening at loud volumes for
an extended time may damage your hearing irreversibly!
5) Children must be supervised by an adult when using the earbuds. Risk of
swallowing small parts.
6) Clean using a slightly damp cloth only.
7) Do not use the earbuds out of the allowed temperature range of -15 °C to
+50 °C.
8) Do not charge the case or earbuds in places with a temperature lower than
0 °C.
9) Do not expose the earbuds or case to direct sunlight for extended periods.
10) Never disassemble or otherwise repair the earbuds yourself (this does not
apply for filters replacement).
11) Keep the earbud filters on both earbuds clean in order to avoid sound
degradation.
12) Using the earbuds in a very dusty or humid environment may result in
damage to the earbuds.
EN
5