Battery Management; Automatic Shutdown; Stable Measured Value; Error - Refco Refscale-C Bedienungsanleitung

7.

Battery Management

To increase battery life, the REFSCALE-C has two functions:

Automatic shutdown:

After 30 minutes without any button operation and without any
changes of the measured value, the device switches off. This only
occurs if energy supply via inserted battery is selected.
Alternative power source:
Instead of using batteries, it is possible to power the REFSCALE-C via
USB Micro Type B, e.g. via a power supply or a power bank.
8.

Stable measured Value

Is displayed when the measured value is stable, and no
changes happens. Weight should not be put on the
REFSCALE-C until this symbol is displayed.
Only in this state it is possible to use the zero function. If this is not
met, the scale must be re-aligned or restarted. The REFSCALE-C
must be placed on a firm, flat surface and it must not experience any
vibration.
9.

Error

Is displayed when a function cannot be executed
successfully.
The possible causes of error are:
- Zero function does not work: Weight not close to zero.
- No stable measurement: Scale is not placed on level or steady,
the surface is not firm and flat.
9.1

Overload Display

26 Instruction Manual