Refco REFSCALE-C Bedienungsanleitung Seite 21

Wireless connection
1. press
2. press
3. press
4. press
5. press
To establish a connection, the Wireless connection symbol must
flash, indicating that the scale is searching for a connection. Once a
connection to a device is established, the symbol lights up
continuously.
The connection to the scale is made via the REFMATE or the
REFMESH. While the connection to an external valve (Valve control)
takes place via the scale. If the Wireless configuration is Off,
incoming, and outgoing connections are not possible.
Gravity / GEO
Depending on the earth region where the REFSCALE-C is used, a
different gravity prevails. Therefore, different gravity values can be
selected.
1. press
2. press
3. press
4. press
according to the table below.
21
, to enter the menu
, navigate to Wireless connection
, confirm
, to select «On / OFF»
, to confirm selection
, to enter the menu
, navigate to Gravity
, confirm
, navigate to the desired gravity number / GEOx
Instruction Manual