Functions - Refco Refscale-C Bedienungsanleitung

6.1

Functions

There are adjustable feet on the back of the scale to level the scale
horizontally using the spirit level on the front of the REFSCALE-C.
On / Off / Lightning
Press and hold for 2 seconds to switch on the device.
Long press to switch the device off.
The backlight can be turned on or off by pressing
briefly.
Set Tare
Tare / 0.00
Resets the scale to zero, only by a weight bigger than 50 g. This
function is used, for example, to subtract the empty cylinder weight.
Net
When taring the scale with a weight on the platform (only with a
weight bigger 50 g), "Net" appears on the display.
By increasing the number of filled/emptied cylinders, while using the
Hold function, the Net display also increases. This is possible up to
Net 9. Then it starts again with Net 1.
ZERO
Resets the tare, the net display and the scale to zero. This can only be
done without weight on the scale or when it is close to zero.
15 Instruction Manual