Refco REFSCALE-C Bedienungsanleitung Seite 18

order to compute the percentage accurately, the REFSCALE-C must
be trained with the weights of an empty and full tank. To train the
REFSCALE-C Tank Capacity Mode, perform the following steps:
1. press
2. press
3. press
4. press
5. press
6. The display shows 0%, indicating that the weight of an empty
container needs to be registered.
Place an empty gas cylinder (or a load equal to the weight of an
empty gas cylinder) on the platform. Wait 5 seconds for the load to
stabilize.
7. press
8. The display shows 100%, indicating that the weight of a full
cylinder needs to be registered.
Place a full gas cylinder (or a load equal to the weight of a full gas
cylinder) on the platform. Wait 5 seconds for the load to stabilize.
9. press
The training process is now completed and the 100% display goes
out.
Tank Capacity Display
After 90% of the programmed value, an approaching alarm brings to
your attention, with an alternating tone, that the required amount is
nearly reached. The following symbol appears on the display, with
the top horizontal bar starting to flash:
18
, to enter the menu
, navigate to Tank Capacity
, confirm
, navigate to «SET»
, confirm
, confirm
, confirm
Instruction Manual