HEIDENHAIN ROC 1313.082 Montageanleitung

Warnhinweise
Warnings
Achtung:
Note: Mounting and commissioning is to be conducted by a qualified specialist under compliance with
local safety regulations.
In addition to this, the machine manufacturer or designer himself must define the other data required
for final assembly (e.g. tightening torque, anti-rotation lock for screws required or not) for the
respective application.
Mounting surfaces and screws must be clean and free of grease.
Do not engage or disengage any connections while under power.
The system must be disconnected from power.
Allgemeine Hinweise
General Information
Check the electrical resistance
> 100 mm
< 1 W
> 100 mm > 200 mm
Noise sources
Absolute rotary encoders with integral bearing
forintegration in motors
Lieferumfang:
Items supplied:
Order separately:
Mounting aid for engaging and disengaging the PCB connector
DR. JOHANNES HEIDENHAIN GmbH
{
Mounting Instructions
Istruzioni di montaggio
ROC 1313.082
5/2015
*I_749194-92*