Avaya one-X SBM24 Bedienungsanleitung

Avaya one-X™ Deskphone Edition for
SBM24 Button Module
Installation and Safety Instructions
Important safety instructions
The most careful attention has been devoted to quality standards in the
manufacture of your new module. Safety is a major factor in the design of every
set. But, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below. These suggestions will enable
you to take full advantage of your new module. Then, retain these tips for later
use.
Warning
This equipment is NOT for residential use. It is for business systems applications
ONLY.
It will NOT operate on public networks.
Use
When using your module, the following safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons.
• Read and understand all instructions.
• Follow all warnings and instructions marked on the module.
• This module can be hazardous if immersed in water. To avoid the possibility
of electric shock, do not use the module when you are wet. If you accidentally
drop the module into water, do not retrieve it until you have first unplugged
the line cord from the modular wall jack. Then, call service personnel to ask
about a replacement.
• Avoid using the module during electrical storms in your immediate area.
There is a risk of electric shock from lightning. Urgent calls should be brief.
Even though protective measures may have been installed to limit electrical
surges from entering your business, absolute protection from lightning is
impossible.
• If you suspect a natural gas leak, report it immediately, but use a telephone
away from the area in question. The module's electrical contacts could
generate a tiny spark. While unlikely, it is possible that this spark could ignite
heavy concentrations of gas.
USA
Comcode: 700420417
16-300697
Issue 2, January 2007
• Never push objects of any kind into the module through housing slots since
they may touch hazardous voltage points or short out parts that could result
in a risk of electric shock. Never spill liquid of any kind on the module. If liquid
is spilled, however, refer servicing to proper service personnel.
• To reduce the risk of electric shock, do not disassemble this module. There
are no user serviceable parts inside. Opening or removing covers may
expose you to hazardous voltages. Incorrect reassembly can cause electric
shock when the module is subsequently used.
Service
Before cleaning, unplug the module. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Unplug the module and be sure to refer servicing to qualified service personnel
when these conditions exist :
• If liquid has been spilled into the module.
• If the module has been exposed to rain or water.
• If the module has been dropped or the housing has been damaged.
• If you note a distinct change in the performance of the module.
CE mark
The "CE" mark affixed to this equipment means that the unit complies with
directives located at http://www.avaya.com/support.
Declaration of Conformity
To download the Declaration of Conformity (DoC) for this equipment, visit
http://support.avaya.com/elmodocs2/DoC/ and click on the link for the
appropriate model.
SAVE THESE INSTRUCTIONS
When you see this warning symbol on the product, refer to the user
!
guide available from the web for more information before
proceeding.