cecotec POWERGYRO 3500 ANGLE SET Bedienungsanleitung Seite 21

- You must use appropriate clothes. Do not use loose clothing.
- You must keep hair, clothes and gloves away from moving
parts that can cause entrapment. Loose clothing or flowing
hair can cause entrapment accidents.
- You must avoid uncomfortable positions during the use of
the device. Position must be sure and balanced to ensure
the correct use of the device, especially with uncontrolled
situations.
- You must avoid the accidental start-up of the device. Make
sure the power tool is turned OFF before connecting it to the
power supply and before moving or handling it. Be especially
careful not to operate the switch inadvertently while the
equipment is switched on, as this may cause an accident.
- You must check all types of heads, tips or accessories before
starting the tool to avoid possible accidents or injuries.
- You must follow at all times the safety instructions in this
manual. Exercise extreme caution when handling the tool.
General safety information for power tools – Use and
handling of power tools
- You must not use power tools if the switch is defective. If
you cannot turn it on or off do not use it, as it may cause an
accident.
- You must use the right tool for the job at hand, this will
increase your safety. Do not ever force the tool.
- Always remove the plug from the tool before: adjusting,
changing accessories, cleaning or handling the device, this
way accidents due to accidental start-ups are avoided.
POWERGYRO 3500 ANGLE SET
POWERGYRO 3500 X-TREME SET
21