cecotec POWERGYRO 3500 ANGLE SET Bedienungsanleitung Seite 144

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Carrying case
2. Set of 10 bits
3. Extension
4. 90º head
5. Power adapter
6. Micro USB cable
7. Charging socket (micro USB connector)
8. Power trigger
9. Lock/rotating direction knob
10. LED work lights (2)
11. Rubber head
12. Bit holder
13. Head removal button
14. Battery status LED indicator lights
15. Eccentric head for corners
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Warning: choking hazard.
Do not let the packaging material within the reach of children, as it may be dangerous.
Box content for reference 00186 - PowerGyro 3500 Angle Set:
- Screwdriver
- Set of 10 bits
- Extension
144
POWERGYRO 3500 ANGLE SET
POWERGYRO 3500 X-TREME SET